A super material applicable to batteries and other energy conversion devices

Unplanned discovery could lead to future pivotal discoveries in batteries, fuel cells, devices for converting heat to electricity and more.

Scientists normally conduct their research by carefully selecting a research problem, devising an appropriate plan to solve it and executing that plan. But unplanned discoveries can happen along the way.

Mercouri Kanatzidis, professor at Northwestern University with a joint appointment in the U.S. Department of Energy’s (DOE) Argonne National Laboratory, was searching for a new superconductor with unconventional behavior when he made an unexpected discovery. It was a material that is only four atoms thick and allows for studying the motion of charged particles in only two dimensions. Such studies could spur the invention of new materials for a variety of energy conversion devices.

Our analysis results revealed that, before this transition, the silver ions were fixed in the confined space within the two dimensions of our material, but after this transition, they wiggled around.” — Mercouri Kanatzidis, joint appointment with Argonne and Northwestern University

Kanatzidis’s target material was a combination of silver, potassium and selenium (α-KAg3Se2) in a four-layered structure like a wedding cake. These 2D materials have length and width, but almost no thickness at only four atoms high.

Superconducting materials lose all resistance to the movement of electrons when cooled to very low temperatures. ​Much to my disappointment, this material was not a superconductor at all, and we could not make it one,” said Kanatzidis, who is a senior scientist in Argonne’s Materials Science Division (MSD).  ​But much to my surprise, it turned out to be a fantastic example of a superionic conductor.”

In superionic conductors, the charged ions in a solid material roam about just as freely as in the liquid electrolytes found in batteries. This results in a solid with unusually high ionic conductivity, a measure of the ability to conduct electricity. With this high ionic conductivity comes low thermal conductivity, meaning heat does not pass through easily. Both of these properties make superionic conductors super materials for energy storage and conversion devices.

The team’s first clue that they had discovered a material with special properties was when they heated it up to between 450 and 600 degrees Fahrenheit. It transitioned into a more symmetrical layered structure. The team also found this transition to be reversible when they lowered the temperature, then raised it again into the high temperature zone.

Our analysis results revealed that, before this transition, the silver ions were fixed in the confined space within the two dimensions of our material,” said Kanatzidis. ​But after this transition, they wiggled around.” While much is known about how ions move about in three dimensions, very little is known about how they do so in only two dimensions.

Scientists have been searching for some time to find an exemplary material to investigate ion movement in 2D materials. This layered potassium-silver-selenium material appears to be one. The team measured how the ions diffused in this solid and found it to be equivalent to that of a heavily salted water electrolyte, one of the fastest known ionic conductors.

While it is too early to tell if this particular superionic material might find practical application, it could immediately serve as a crucial platform for designing other 2D materials with high ionic conductivity and low thermal conductivity.

These properties are very important for those designing new two-dimensional solid electrolytes for batteries and fuel cells,” said Duck Young Chung, principal materials scientist in MSD.

Studies with this superionic material could also be instrumental for designing new thermoelectrics that convert heat to electricity in power plants, industrial processes and even exhaust gas from automobile emissions. And such studies could be used for designing membranes  for environmental cleanup and desalting of water.

This research appeared in a Nature Materials paper entitled ​A two-dimensional type I superionic conductor.” In addition to Kanatzidis and Chung, authors include Alexander J. E. Rettie, Jingxuan Ding, Xiuquan Zhou, Michael J. Johnson, Christos D. Malliakas, Naresh C. Osti, Raymond Osborn, Olivier Delaire and Stephan Rosenkranz. The team includes researchers from Argonne, Northwestern, DOE’s Oak Ridge National Laboratory, University College London and Duke University. 

The team’s experimental measurements used the Spallation Neutron Source at Oak Ridge National Laboratory, the Integrated Molecular Structure Education and Research Center at Northwestern and beamline 17-BM-B at Argonne’s Advanced Photon Source, a DOE Office of Science User Facility. Their computer simulations used the computing resources provided on Bebop, a high performance computing cluster at Argonne.

This research was primarily supported by the DOE Office of Science, Office of Basic Energy Sciences.

About the Advanced Photon Source

The U. S. Department of Energy Office of Science’s Advanced Photon Source (APS) at Argonne National Laboratory is one of the world’s most productive X-ray light source facilities. The APS provides high-brightness X-ray beams to a diverse community of researchers in materials science, chemistry, condensed matter physics, the life and environmental sciences, and applied research. These X-rays are ideally suited for explorations of materials and biological structures; elemental distribution; chemical, magnetic, electronic states; and a wide range of technologically important engineering systems from batteries to fuel injector sprays, all of which are the foundations of our nation’s economic, technological, and physical well-being. Each year, more than 5,000 researchers use the APS to produce over 2,000 publications detailing impactful discoveries, and solve more vital biological protein structures than users of any other X-ray light source research facility. APS scientists and engineers innovate technology that is at the heart of advancing accelerator and light-source operations. This includes the insertion devices that produce extreme-brightness X-rays prized by researchers, lenses that focus the X-rays down to a few nanometers, instrumentation that maximizes the way the X-rays interact with samples being studied, and software that gathers and manages the massive quantity of data resulting from discovery research at the APS.

This research used resources of the Advanced Photon Source, a U.S. DOE Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC0206CH11357.

Argonne National Laboratory seeks solutions to pressing national problems in science and technology. The nation’s first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America’s scientific leadership and prepare the nation for a better future. With employees from more than 60 nations, Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy’s Office of Science.

The U.S. Department of Energy’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, visit https://​ener​gy​.gov/​s​c​ience.